Bow / CompetitionTRX® 34

(3 reviews)

The TRX 34 is the perfect crossover bow for competition and hunting at 34 inch axle-to-axle with a 6.5 inch brace height. The wider riser adds rigidity throughout the sight and rest-mounting locations while the dovetail mount accommodates QAD’s IMX and the new TRi rests. This new riser design also features 3D Damping to reduce post-shot vibration. The new 75% percent mod gives shooters more speed and a better feel while the 80 percent and 70V mods remain an excellent option to customize your feel. The TRX 34 is powered by the highly efficient C3X Crosscentric Cam system to deliver accurate energy with an incredibly smooth draw. Our overhauled AVS and Zero-T axle bearings improve overall strength and rigidity to increase accuracy and consistency for the shooter. New enlarged diameter stabilizer bushing also increases stiffness of shooters' stabilizer set up, enhancing accuracy.

Axle-to-Axle 34"
Brace Height 6.5"
IBO Rating 334 FPS

Finishes

(Please Select)
LET OFF 70V, 75% & 80%
BOW WEIGHT 4.69 LBS
IBO RATING 334 FPS
DRAW WEIGHT 50, 60, 70 LBS
AXLE TO AXLE 34"
BRACE HEIGHT 6.5"
DRAW LENGTHS 23.5"-30"
MSRP $1849

Make It Yours

ExploreThe Only Option

Archery’s most decorated Champion is showing no signs of slowing down.

Reviews

  1. Bill Campbell

    5 out of 5 Only option for discontinued Traverse

    Bill Campbell

    I found an immaculate Traverse which at 33 ATA I think is the ultimate platform to have built into a great all around bow. Unfortunately it was right handed. Many were thinking Mathews was going to put the crosscentric w/ switchweight techknology on the Traverse and keep it in the lineup for 2021. The TRX 34 is what’s going to have to fill the void. I wish Mathews would really think about bringing back the 33 with the Switch cams.

    Was This Review Helpful? 0 0

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. srhilligoss

    5 out of 5 Amazed!

    srhilligoss

    Just brought home TRX 34. I have owned Mathews hunting bows for a while, Halon 32, Vertix, and currently a VXR 31.5. I wanted to try a target bow, so I shot a TRX 38G2, TRX 36, and TRX 34. All very nice, but the TRX 34 stood out to me. What a smooth draw, great feel, and great hold on target. Currently using the 70V mods. I see me using this bow at the 3D course and in the hunting woods. Loving this bow so far………

    Was This Review Helpful? 0 0

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Greg Bacorn

    5 out of 5 Great crossover bow!

    Greg Bacorn

    My first target bow! I am a 3D shooter for the most part. I have always used hunting models (Triax and V3) up until now. I decided to go with a full on target bow. After shooting the TRX 34 and 36, I ended up with the 34! So far very impressed. Holds rock solid. Very quiet. And if you want to hunt with it, it has the ability to mount a quiver just like the hunting models. Would like to see higher letoff modules available, but the 80% are not bad by any means.

    Was This Review Helpful? 0 0

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up